Automatic Sliding Gates


Automatic Sliding Gates

Total Secure Automation Ltd manufacture BSEN 12435 compliant, automatic sliding gates. Where the use of conventional swinging gates are not feasible due to space restrictions, the SA9000 automatic cantilevered sliding gate is an easy to install, ideal solution.

The standard round tube infill can be replaced by a variety of infill options including D or W profile palisade pales, timber panels, solid sheeting and various mesh panels to integrate perfectly with all fence types.

The SA9000 automatic cantilever gate has a manual release mechanism concealed within the lockable housing unit, allowing manual control of the gate in the event of a power failure. To aid in the safety aspect of the automatic cantilevered sliding gate, the portal is fitted with dual-height photo cells and rubber profile safety edges. The gate is operated by a programmable logic controller, operated via an inverter, which allows for programming of various parameters such as gate speed, passage timeout, automatic opening times, free exit loop operating times etc Proximity sensors mounted in the main portal read the moving gate leaf, indicating the start and end of the travel cycle. Towards the back of the gates opening area, a floor mounted support roller supports the weight of the gate in the fully open position. Anti-climb spikes are optional for gates over 1500mm high.

Complete with SIX Safety Edges

Specification:
CE Approved 2006/42/EC BS EN12435 compliant.

Dimensions:
250mm x 225mm extruded aluminium beam.
Infill: 30mm diameter x 6mm wall thickness.

Power requirement:
Single phase 230v, 50Hz, 10 amps.

Drive motor:
0.75kw's - 1.1kw's, 3 phase.

Maximum span:
10 metres drive through.
(14.5 metres overall) single leaf.

Maximum height:
2.4 metres (maximum width 10 metres).
3.0 metres (maximum width 6.0 metres).

Duty cycle:
100%.

Operation time:
4 seconds per metre (variable).

Finish:

Steel Components:
Shot Blasted.
Zinc Phosphate immersion coated.
Zinc Primer.
2K PU Finish.

Aluminium Components:
Abraded.
2K PU Finish.

Operation:
Linear driven, 3 phase motor via an inverter and programmable logic controller.

Access controls:
Proximity card readers, keypads, remote control fobs, push-button control raise/stop/lower, intercom system/video system, token acceptor.

Exporting Automatic Sliding Gates to the Middle East and Africa...

Middle East Countries where we export automatic sliding gates: Egypt, Turkey, Sudan, Algeria, Morocco, Iraq, Saudi Arabia, Yemen, Syria, Israel, Libya, Jordan, United Arab Emirates, Lebanon, Palestinian territories, Kuwait, Oman, Qatar and Bahrain.

African Countries where we export automatic sliding gates: Algeria, Angola, Benin, Botswana, Burkina Faso, Burundi, Cameroon, Cape Verde, Central African Rep, Chad, Congo, Dem. Rep. Congo (Zaire), Djibouti, Egypt, Equatorial Guinea, Eritrea, Ethiopia, Gabon, Gambia, Ghana, Guinea Bissau, Guinea, Ivory Coast, Kenya, Lesotho, Liberia, Libya, Madagascar, Malawi, Mali, Mauritania, Mauritius, Morocco, Mozambique, Namibia, Niger, Nigeria, Reunion, Rwanda, Senegal, Seychelles, Sierra Leone, Somalia, South Africa, Sudan, Swaziland, Tanzania, Togo, Tunisia, Uganda, Zambia, Zanzibar and Zimbabwe.